The current DRAM standard, DDR3, was launched in 2007, and it has been the primary memory chip used in a wide range of computing devices for most of that time. But change is coming, at last. Here’s what you need to know about the new standard.
How fast is DDR4?
Later this year, Intel will release its Haswell-E X99 chipset with support for DDR4: the new, faster memory chip standard. After five years of development, the new chips will provide roughly 50 percent more bandwidth and consume about 30 percent less power. According to Intel, they’ll be deployed in new motherboards in the “second half of 2014.”
Not only will the X99 motherboard support DDR4, but it will also host 8-core processors—twice the number in the current Intel Core CPUs. The top DDR4 bus speed will be 3,200 MHz, compared to DDR3’s 2,400 MHz, and it will support data transfer rates of up to 3.2 billion transfers per second, which is twice the transfer speed of DDR3. Furthermore, the new chips use only 1.2 volts of power, compared to DDR3’s 1.5 volts. If those benefits aren’t enough, DDR4 also provides improved diagnostic and debugging tools for increased overall reliability.
When will we see DDR4?
Samsung and a few other chip makers have already started manufacturing DDR4 memory sticks. Samsung Semiconductor says it’s churning out 32GB sticks for the premium server market, as well as what the company claims is the world’s smallest and highest performing 4GB RAM chip. It’s expected that we’ll start seeing DDR4 chips first in high-end database and enterprise resource planning (ERP) servers, with DDR4-powered laptops and desktops coming to market in 2015. In addition, Samsung announced a low-power version of DDR4 (LP-DDR4) for mobile devices back in January of 2014.
According to the Joint Electron Devices Engineering Council (JEDEC) — an organization that sets memory standards — DDR4 also supports deep power down, which allows it to go into a mode of sleep that requires no memory refresh. Plus, it can refresh a single chip on a DIMM, instead of forcing a refresh of the entire DIMM. These and other power enhancements let DDR4 use up to 50 percent less standby power.
DDR’s last dance
Most experts believe that DDR4 is the last generation of DDR DRAM that will be made. A few other types of non-volatile memory that can retain data, such as phase-change memory, MRAM (magneto-resistive RAM), and RRAM (resistive RAM), are under development and look promising.
Phase-change memory, or PCM/PRAM, provides higher read/write bandwidth, higher endurance, and lower latency than DRAM does. According to memory maker Micron, PCM “addresses the growing performance gap between DRAM and nonvolatile memory technologies.”
With faster processors and soon-to-be-released SATA Express solid-state drive technology making our computing devices faster, it won’t be long before we need faster memory to keep up. DDR4 should fill that gap … for the immediate future, anyway
Editors' Recommendations
- GPT-4o: What the latest ChatGPT update can do and when you can get it
- How much RAM do you need for a laptop, gaming PC, or tablet?
- The end of DDR4 hurts, but it’s ultimately a good thing
- What’s the difference between DDR3 and DDR4 RAM?
- Samsung’s massive DDR5 512GB RAM modules are almost twice as powerful as DDR4
