Boeing has plans to weather test its planes with 3D-printed fake ice

By Kelly Hodgkins Published April 19, 2016

boeing 3d printed ice 787 — Boeing

Commercial and private aircraft encounter ice on a regular basis and this combination of ice and aviation is as dangerous as it sounds. The frozen water can adhere to a plane’s wing and fuselage changing its aerodynamics and possibly causing the plane to crash. To test an aircraft’s ability to shed this dangerous ice, Boeing may be developing a 3D-printed artificial ice that replicates all relevant weather conditions, making it ideal for ground testing.

boeing-plane-deicing — Image used with permission by copyright holder

According to a patent application filed by Boeing and found by AeroPatent, the aircraft manufacturer is exploring the possibility of using a 3D-printed plastic ice to simulate icing on a plane. The material can print in different shapes that fit on a plane’s wings, flaps and the engine just like real ice. The amount of ice that is formed can be controlled with precision, allowing researchers to monitor changes in the plane’s aerodynamics and test the aircraft’s de-icing capabilities. The material also can be printed according to FAA icing certification requirements so any testing with the material will receive FAA approval.

Each ice piece can be printed in a testing facility and applied using a double-sided adhesive foam that allows for the removal and placement of a variety of different shapes depending on the testing conditions. Because they are 3D printed, these 3D forms can be designed and applied in a short amount or time and with minimal damage to the aircraft.

This 3D-printed technique offers a significant improvement over existing testing protocols that require a plane to be outfitted with artificial ice shapes comprised of fiberglass resin that are bolted to the aircraft chassis. These synthetic ice components are tedious to make and often damage the test plane to which they are applied. In conventional fiberglass tests, the demo aircraft is rendered unusable, adding to the overall cost of research and development.

Topics

Contributor

Kelly's been writing online for ten years, working at Gizmodo, TUAW, and BGR among others. Living near the White Mountains of…

Emerging Tech

The best 3D printers under $500

3D printers are finally affordable. Here are the best models under $500

anycubic photon review 3d printer xxl 2

The 3D printing market has seen quite a few changes over the last few years. In just the span of a decade, the barrier to entry has dropped from well over several thousand dollars to under $200 in some cases. However, all entry and mid-level printers are not made equal. We have a few suggestions for prospective buyers and other information regarding alternatives not found on this list.

To some veterans of the 3D printing scene, this list may seem like it lacks a few of the most commonly recommended printers for newcomers. This is by design. Our list only considers printers with tested components from proven, reliable vendors. That's why we chose the Monoprice MP Mini v2 as our top pick--it's reliable and easy to use. We have avoided any printer with a frame primarily made from interlocking acrylic pieces and anything historically unreliable.
Most bang for your buck: Monoprice MP Mini v2

Pros:

News

Ceramic ink could let doctors 3D print bones directly into a patient’s body

ceramic ink 3d printed bones bioprinting australia 2

Scientists use a novel ink to 3D print ‘bone’ with living cells

The term 3D bioprinting refers to the use of 3D printing technology to fabricate biomedical parts that, eventually, could be used to create replacement organs or other body parts as required. While we’re not at that point just yet, a number of big advances have been made toward this dream over the past couple of decades.

Emerging Tech

The future of making stuff: Inside the evolution of 3D printing with Formlabs

future of 3d printing formlabs ces 2021 castablewax40

When 3D printing went mainstream in the mid-2010s and exploded in popularity, it was about as hyped up as it possibly could be. Evangelists told us it would fundamentally transform the way goods were made, and usher in a bold new era of creative freedom. Soon, they said, we’d be able to fabricate anything we wanted on-demand, Star Trek replicator style, right from the comfort of our own homes.

But of course, 3D printing didn't really live up to that high-flying dream. Instead, it made a momentary splash and then largely returned to the fringes, gaining adoption in hobbyist workshops and cutting-edge product design labs, but not really changing the face of manufacturing in the way many hoped it might.