Skip to main content

Circuit Cubes teaches kids basics of circuitry with Lego blocks, light-up LEDs

Tactile learning is one of the most powerful ways to teach a kid. Kids who touch and feel their way through a difficult subject tend to internalize — and articulate — the concepts better. And for a subject as abstract as circuitry, there’s perhaps no better way to convey the basics than with Circuit Cubes, snap-on modules that kids can use to build the machines of their dreams.

There’s a motor cube that drives a gear shaft at 1,000 RMPs, an LED module that lights up brightly when attached to a completed circuit, and a rechargeable battery module that last up to one hour of active play (and three days on standby).

It’s the debut effort of longtime educators Nate MacDonald and John Schuster, who spent years developing lessons with an interdisciplinary basis in STEM — science, technology, engineering, and mathematics. MacDonald co-founded Sonoma State University’s Maker Certificate program and advised the White Hill Robotics Club, an elective at White Hill Middle School in Fairfax, California.

Schuster, the former IT director at White Hill Middle School, teamed up with MacDonald to found Tenka Labs, a startup with a mission to design toys that are “as fun to play with and build with, but that along the way, enable kids to learn about basic circuitry.”

Legos + circuits = fun

Intuitiveness was a core consideration in the Circuit Cubes’ design. Each module measures two standard Lego bricks high and four Lego bricks wide and pairs via two silver terminals on the modules’ front.

“We wanted the form factor to be approachable, but small enough to build structures with,” Schuster said, “and we wanted the components to be visible so that kids could experiment.”

To that point, the base of the motor and LED module are made of a translucent material, and motor lines on the bottom show the flow of electricity. That’s to demonstrate the concept of polarity and resistance, Schuster said. Attaching a motor module directly to a battery module will cause it to spin quickly, but adding an LED module to the circuit will slow it down. Swapping the negative and positive contacts, on the other hand, will cause it to reverse its direction.

“It teaches kids basic technology literacy,” he said. “It’s not about the blocks themselves but what you can make with them.” It’s not so complicated that kids couldn’t figure out how to build things on their own, Schuster was quick to point out. “The minute kids have to go ask their parents for help, they’ve lost ownership of it,” he said. As a result, the system is simple enough that kids can construct a simple gadget without much thought. “They can build a car in tens seconds or less.”

Different designs for all interests

Circuit Cubes ship in one of three $60 kits differentiated by pack-ins. The Whacky Wheels kit ships with building instructions for cars, trucks, bikes, bridges, and Ferris wheels. Bright Lights boasts templates for telescoping tools, light sabers, and superhero GOBO. The Smart Art kit comes with felt tip pens for drawing robots that produce swirling designs on canvases.

The kits don’t prescribe designs, though. “The core ones allow you to do so many things,” John said. “It’s a design driven by kids. Their inspiration is what it’s all about.”

“It’s a design driven by kids. Their inspiration is what it’s all about.”

Schuster showed off a few models early Circuit Cube testers put together. There was a cut-out butterfly that flapped its wings with the help of a motor module, a battery module, and a few moving Lego “limbs.” An AT-AT_inspired walker moved lumbered forward, and another simulated rotating lights that’d be right at home on top of a police siren.

One of the most inventive creations was a toy rabbit that’d been stuffed with a Lego “skeleton” comprising a “spine,” a battery module, and a motor module that caused it to nod its head as though it was acknowledging Schuster’s words. “It’s a bit creepy,” he said. “But that’s the beauty. The Circuit Cubes allow almost endless creativity. ”

Getting kids into tech

The launch of Circuit Cubes comes as the U.S. faces record growth in demand — 17 percent by 2024 — for STEM jobs. But there’s a shortage of qualified candidates. The country ranks 27th in math compared to the rest of the world, and only 36 percent of the country’s high school graduates are ready to take college-level science courses.

“Kids need to be completely engaged first if they’re going to really absorb complex concepts on how things work,” Schuster said. He and MacDonald are developing a classroom curriculum for the Circuit Cube kits that are launching today, and are building an online community that’ll host “hundreds” of projects that kids will be able to “get ideas from.”

Kyle Wiggers/Digital Trends

“When kids are having fun, they’re at their maximum learning curve to develop the skills needed to start building and designing things, and to go on their own adventure,” he said.

Schuster and MacDonald are focusing on the launch of the first-generation Circuit Cubes, but they’re already hard at work on a future iteration that will allow kids to control modules with a smartphone or tablet via Bluetooth.

“It’s like the cheese on the broccoli,” said Schuster. “It’s forgetting about what the Circuit Cubes can do and creating some cool adventure.”

Kyle Wiggers
Former Digital Trends Contributor
Kyle Wiggers is a writer, Web designer, and podcaster with an acute interest in all things tech. When not reviewing gadgets…
Digital Trends’ Top Tech of CES 2023 Awards
Best of CES 2023 Awards Our Top Tech from the Show Feature

Let there be no doubt: CES isn’t just alive in 2023; it’s thriving. Take one glance at the taxi gridlock outside the Las Vegas Convention Center and it’s evident that two quiet COVID years didn’t kill the world’s desire for an overcrowded in-person tech extravaganza -- they just built up a ravenous demand.

From VR to AI, eVTOLs and QD-OLED, the acronyms were flying and fresh technologies populated every corner of the show floor, and even the parking lot. So naturally, we poked, prodded, and tried on everything we could. They weren’t all revolutionary. But they didn’t have to be. We’ve watched enough waves of “game-changing” technologies that never quite arrive to know that sometimes it’s the little tweaks that really count.

Read more
Digital Trends’ Tech For Change CES 2023 Awards
Digital Trends CES 2023 Tech For Change Award Winners Feature

CES is more than just a neon-drenched show-and-tell session for the world’s biggest tech manufacturers. More and more, it’s also a place where companies showcase innovations that could truly make the world a better place — and at CES 2023, this type of tech was on full display. We saw everything from accessibility-minded PS5 controllers to pedal-powered smart desks. But of all the amazing innovations on display this year, these three impressed us the most:

Samsung's Relumino Mode
Across the globe, roughly 300 million people suffer from moderate to severe vision loss, and generally speaking, most TVs don’t take that into account. So in an effort to make television more accessible and enjoyable for those millions of people suffering from impaired vision, Samsung is adding a new picture mode to many of its new TVs.
[CES 2023] Relumino Mode: Innovation for every need | Samsung
Relumino Mode, as it’s called, works by adding a bunch of different visual filters to the picture simultaneously. Outlines of people and objects on screen are highlighted, the contrast and brightness of the overall picture are cranked up, and extra sharpness is applied to everything. The resulting video would likely look strange to people with normal vision, but for folks with low vision, it should look clearer and closer to "normal" than it otherwise would.
Excitingly, since Relumino Mode is ultimately just a clever software trick, this technology could theoretically be pushed out via a software update and installed on millions of existing Samsung TVs -- not just new and recently purchased ones.

Read more
AI turned Breaking Bad into an anime — and it’s terrifying
Split image of Breaking Bad anime characters.

These days, it seems like there's nothing AI programs can't do. Thanks to advancements in artificial intelligence, deepfakes have done digital "face-offs" with Hollywood celebrities in films and TV shows, VFX artists can de-age actors almost instantly, and ChatGPT has learned how to write big-budget screenplays in the blink of an eye. Pretty soon, AI will probably decide who wins at the Oscars.

Within the past year, AI has also been used to generate beautiful works of art in seconds, creating a viral new trend and causing a boon for fan artists everywhere. TikTok user @cyborgism recently broke the internet by posting a clip featuring many AI-generated pictures of Breaking Bad. The theme here is that the characters are depicted as anime characters straight out of the 1980s, and the result is concerning to say the least. Depending on your viewpoint, Breaking Bad AI (my unofficial name for it) shows how technology can either threaten the integrity of original works of art or nurture artistic expression.
What if AI created Breaking Bad as a 1980s anime?
Playing over Metro Boomin's rap remix of the famous "I am the one who knocks" monologue, the video features images of the cast that range from shockingly realistic to full-on exaggerated. The clip currently has over 65,000 likes on TikTok alone, and many other users have shared their thoughts on the art. One user wrote, "Regardless of the repercussions on the entertainment industry, I can't wait for AI to be advanced enough to animate the whole show like this."

Read more