Skip to main content

Check out the winners of this year's 1,900-mile World Solar Challenge race

2015 World Solar Challenge - we have a winner!
In case you missed it, the World Solar Challenge — a solar-powered car race that pits cozens of teams against each other in a 1,900 mile race across the Australian outback– happened this past week week. Ever since 1987, the WSC has sent teams from Darwin in Australia’s Northern Territory across the Outback into Adelaide, the capital of South Australia. The teams that placed in the 2015 challenge come from all over the world, but each team’s eight-day trek from Darwin to Adelaide was completed in a whole new class of renewable energy vehicle.

The difficulties of any long-distance race are clear from an engineering standpoint, but completing the course in solar-powered cars presents international teams with a unique set of challenges. The World Solar Challenge rules and regulations were inspired by the original idea that a 1000 Watt car could complete the journey from Darwin to Adelaide in 50 hours. Ten percent of that energy projection is allotted to solar cars in the challenge: 5 kilowatt hours of stored energy per charge. After that, the Challenge hopes to encourage the development of the world’s most efficient electric vehicles technologies, pushing teams to maximize the power in every charge, source energy from the sun, and recover kinetic energy from the vehicle itself.

The race is split into three separate groups that compete simultaneously: the Challenger Class, Cruiser Class, and Adventure Class. Each of these classes focus on a different feat of solar power engineering, and teams that compete within them must meet a strict set of criteria. Here’s a breakdown of the 2015 race results.

Challenger Class Winner: Nuon Solar w/ Nuna 8

nuon_solar_WSC
Nuon Solar

Challenger Class competitors race in smaller cars designed to carry one driver alone, and aim to beat the best time for each day as they reach checkpoints along the single, complete stage from Darwin to Adelaide. Entrants in the Challenger Class are also required to complete the entire stage with one battery charge, relying on solar power to fuel whatever is left of the journey after that charge expires.

This year, the Dutch dominated at the top of the podium, with Nuon Solar winning first place for the second consecutive time. Nuon Solar already has the first-place 2013 Challenger Class title to its name, and this year’s Nuna 8 is an improvement on the previous Nuna 7 model. The team’s strategy over the years has relied on the lightweight, durable quality of 3D printed materials to keep weight low and efficiency high. The spoiler on the Nuna 8 was completely 3D printed, and only weighed 250 grams. In their victory celebration at the finish line, some of the team’s leadership pointed out the trouble with cloud coverage when racing a solar-powered car.

Cruiser Class Winner: Team Eindhoven w/ Stella Lux

Nederland, Eindhoven, 2 juli 2015. Stella Lux, de 2e familie zonnewagen van Solar Team Eindhoven, het studententeam van de Technische Universiteit Eindhoven. // Stella Lux, the 2nd solar family car by Solar Team Eindhoven, the studentteam of Eindhoven University of Technology. photo: TU Eindhoven / Bart van Overbeeke
Image used with permission by copyright holder

Cruiser Class competitors race with one driver and one passenger in each vehicle, and their times are scored based on two halves of the journey instead of day-long destination stages. The first stage in the Cruiser Class spans from Darwin to Alice Springs, the route’s midway point between Darwin and Adelaide. The stop in Alice Springs affords Cruiser Class competitors the chance to recharge their vehicle’s batteries, but that means that for two legs of the race (between Darwin and Alice Springs and between Alice Springs and the finish line in Adelaide) vehicles have to run completely on solar power to supplement their battery charge.

Eindhoven’s team won this year’s Cruiser Class in the Stella Lux: an updated version of their 2013 Stella vehicle. Their 2015 upgrades focused on a redesigned body that features a wind tunnel aligned with the center of the car. This kind of aerodynamic design helped to reduce the energy expenditure of the car while on course, which is crucial when competing in the Cruiser Class. Overall, the Stella Lux weighs 826 pounds and is made mostly of carbon fiber. Since Cruiser Class vehicles are required to carry more weight over a greater distance with less access to grid charging, 3D printing isn’t always a viable option.

Adventure Class Winner: TAFE SA w/ Solar Spirit

tafesa
Image used with permission by copyright holder

The Adventure Class allows cars built for previous editions of the event to run again, usually with new team members. This bracket is generally used as a catchment for under-funded teams that haven’t quite met all the strict race requirements of the Challenger or Cruiser classes — so it’s often filled with student teams and independent groups without a lot of sponsors. As such, this race is usually a bit less competitive

This year, no cars from the Adventure Class actually finished the entire 1,900 mile (3022 km) course. In the end, it came down to which car had traveled the furthest distance in the least amount of time, with the Australian student team TAFE SA taking the top spot in its Solar Spirit vehicle. The car managed to travel 809 miles in 47 hours before going out, at which point it had to be trailered to the finish line.

Chloe Olewitz
Chloe is a writer from New York with a passion for technology, travel, and playing devil's advocate. You can find out more…
Digital Trends’ Top Tech of CES 2023 Awards
Best of CES 2023 Awards Our Top Tech from the Show Feature

Let there be no doubt: CES isn’t just alive in 2023; it’s thriving. Take one glance at the taxi gridlock outside the Las Vegas Convention Center and it’s evident that two quiet COVID years didn’t kill the world’s desire for an overcrowded in-person tech extravaganza -- they just built up a ravenous demand.

From VR to AI, eVTOLs and QD-OLED, the acronyms were flying and fresh technologies populated every corner of the show floor, and even the parking lot. So naturally, we poked, prodded, and tried on everything we could. They weren’t all revolutionary. But they didn’t have to be. We’ve watched enough waves of “game-changing” technologies that never quite arrive to know that sometimes it’s the little tweaks that really count.

Read more
Digital Trends’ Tech For Change CES 2023 Awards
Digital Trends CES 2023 Tech For Change Award Winners Feature

CES is more than just a neon-drenched show-and-tell session for the world’s biggest tech manufacturers. More and more, it’s also a place where companies showcase innovations that could truly make the world a better place — and at CES 2023, this type of tech was on full display. We saw everything from accessibility-minded PS5 controllers to pedal-powered smart desks. But of all the amazing innovations on display this year, these three impressed us the most:

Samsung's Relumino Mode
Across the globe, roughly 300 million people suffer from moderate to severe vision loss, and generally speaking, most TVs don’t take that into account. So in an effort to make television more accessible and enjoyable for those millions of people suffering from impaired vision, Samsung is adding a new picture mode to many of its new TVs.
[CES 2023] Relumino Mode: Innovation for every need | Samsung
Relumino Mode, as it’s called, works by adding a bunch of different visual filters to the picture simultaneously. Outlines of people and objects on screen are highlighted, the contrast and brightness of the overall picture are cranked up, and extra sharpness is applied to everything. The resulting video would likely look strange to people with normal vision, but for folks with low vision, it should look clearer and closer to "normal" than it otherwise would.
Excitingly, since Relumino Mode is ultimately just a clever software trick, this technology could theoretically be pushed out via a software update and installed on millions of existing Samsung TVs -- not just new and recently purchased ones.

Read more
AI turned Breaking Bad into an anime — and it’s terrifying
Split image of Breaking Bad anime characters.

These days, it seems like there's nothing AI programs can't do. Thanks to advancements in artificial intelligence, deepfakes have done digital "face-offs" with Hollywood celebrities in films and TV shows, VFX artists can de-age actors almost instantly, and ChatGPT has learned how to write big-budget screenplays in the blink of an eye. Pretty soon, AI will probably decide who wins at the Oscars.

Within the past year, AI has also been used to generate beautiful works of art in seconds, creating a viral new trend and causing a boon for fan artists everywhere. TikTok user @cyborgism recently broke the internet by posting a clip featuring many AI-generated pictures of Breaking Bad. The theme here is that the characters are depicted as anime characters straight out of the 1980s, and the result is concerning to say the least. Depending on your viewpoint, Breaking Bad AI (my unofficial name for it) shows how technology can either threaten the integrity of original works of art or nurture artistic expression.
What if AI created Breaking Bad as a 1980s anime?
Playing over Metro Boomin's rap remix of the famous "I am the one who knocks" monologue, the video features images of the cast that range from shockingly realistic to full-on exaggerated. The clip currently has over 65,000 likes on TikTok alone, and many other users have shared their thoughts on the art. One user wrote, "Regardless of the repercussions on the entertainment industry, I can't wait for AI to be advanced enough to animate the whole show like this."

Read more