Skip to main content

JLAB JBuds J4M Review

jlab-jbuds-j4m-side-remote
JLAB JBuds J4M
“The J4M get points for achieving a durable, rugged design and we appreciate the effort to provide a wide range of eartips for proper fit.”
Pros
  • Rugged design
  • Mic and control switch included
Cons
  • Underwhelming sound
  • Insecure fit
  • No built-in volume control

Those looking to upgrade the stock earbuds that come with phones and portable media devices are now confronted with an almost ridiculous number of options. You can get some entry level ‘phones with the change in your pocket at the grocery store or pharmacy (ex: JVC Marshmallow) or for a few bucks more you can step it up a notch and grab a slightly more comfortable pair at the electronics department of your big-box store (ex: Sennheiser CX215).

Then there’s this segment that sits right around the $50.00 mark that, in our opinion, should start to offer better features and noticeably better sound quality than that of the entry-level bubble gum ilk. JLAB’s J4M JBuds, along with a slew of others we’ll be reviewing over the coming days fit right into that category. Let’s see how they stack up.

Out of the Box

One shouldn’t expect to be met with a bunch of extras when cracking open the box of a $50 set of earphones. You’re just not likely to get cord extensions, airline adapters or ¼” adapters at this level. The J4M don’t issue any surprises in this regard. What you do get is a pair of earphones and just about every eartip size under the sun. In total we counted four sizes of single flange silicone tips and three sizes of double flange tips. The J4M also come with a rugged, if not entirely attractive, carrying case that JLAB points out offers enough extra space to hold an iPod nano or shuffle as well.

jlab-jbuds-j4m-accessories-earbuds
Image used with permission by copyright holder

Features

JLAB touts that the J4M may be the most rugged earphones ever made. We’re not sure we’d go that far, but we will concede that these earphones look and feel pretty tough. We’re not feeling gutsy enough to run them over with a car, but if we had to place a bet, our money would be on the J4M surviving the hit and run. It isn’t just the ear-pieces that feel tough, every contact point that the cord makes is reinforced by a thick, fairly flexible strain relief. Even the microphone and control unit located 4 inches down the left earphone cord is made of impact resistant plastic.

The J4M cord is flat and said to be tangle free. It may be tangle free, but it still gets twisted with the best of them. The cord is also a little on the stiff side, and as we’ll soon disclose, we think this contributed to a problem we had with the J4M popping out of our ears.

jlab-jbuds-j4m-close-upThese canal phones are meant to work with all sorts of phones and portable devices. There’s just one button, so plan on learning the “code” of clicks for skipping tracks and don’t plan on changing the volume without grabbing your device.

jlab-jbuds-j4m-remote-horizontal
Image used with permission by copyright holder

Performance

We tested the JRM using a Headroom Micro DAC, Headroom Micro Amp, and iPhone 3G, iPhone 4, and a Dell N5110 Laptop. Some of our test tracks included Marcus Miller’s “Panther” and “Mr. Pastorius” from the album The Sun Don’t Lie, “Uptown Up” and “Advanced Funk” from Maceo Parker’s Roots and Grooves” and “Babylon Sister” from Steely Dan’s Gaucho album.

jlab-jbuds-j4m-earbuds-verticalThe fit of a canalphone like the J4M is crucial. Fit has implications on comfortability, security and sound quality. Unfortunately we had trouble getting the J4M to fit well, which is a little ironic since almost every size of eartip imaginable is included with the earphones. It turns out the problem wasn’t finding the right size (we did ok there), the issue was getting them to stay put.

We have to point to three factors that we believe caused the J4M to wiggle out of our ears. First, the rugged design, while great for keeping things from breaking, ends up placing weight in the wrong places. There’s enough ballast on the backside of the J4M that they tended to wanted to move out of our ears rather seat securely inside. Then there’s the issue of eartip texture. While soft, the eartips have no grip to them, so there’s little to keep them sliding against the skin. Finally, the stiffness of the cord that we mentioned earlier exerted enough force on the earphones as it moved around that there was no keeping the little buggers in place. Granted, everyone’s ears are different and we’re sure there are folks who haven’t had or won’t ever have problems keeping the J4M in place but, folks, we test a lot of earphones and we rarely have this problem. We’re pretty sure others will too.

In terms of sound quality, the J4M didn’t do a whole lot for us. There was some bloat around the mid-bass region, a noticeable bump right in the vocal region and some harshness around the sibilant sounds of the letter ‘s’. We can usually look around one audible oddity, but there was too much going on with the J4M for us not to say that we just didn’t enjoy their sound very much.

Conclusion

The J4M get points for achieving a durable, rugged design and we appreciate the effort to provide a wide range of eartips for proper fit. However, the lack of grip on the eartips along with heavy earphones and stiff cable made it tough to keep these earphones in place. That, along with sound quality with more than just a couple of quirks, keeps us from recommending the J4M.

Highs:

  • Rugged design
  • Mic and control switch included

Lows:

  • Underwhelming sound
  • Insecure fit
  • No built-in volume control
Caleb Denison
Digital Trends Editor at Large Caleb Denison is a sought-after writer, speaker, and television correspondent with unmatched…
The Beats Pill is back, baby!
A pair of Beats Pill speakers.

In what's been one of the worst-kept secrets of the year -- mostly because subtly putting a product into the hands of some of the biggest stars on the planet is no way to keep a secret -- the Beats Pill has returned. Just a couple of years after Apple and Beats unceremoniously killed off the stylish Bluetooth speaker, a new one has arrived.

Available for preorder today in either black, red, or gold, the $150 speaker (and speakerphone, for that matter) rounds out a 2024 release cycle for beats that includes the Solo Buds and Solo 4 headphones, and comes nearly a year after the Beats Studio Pro.

Read more
Ifi’s latest DAC is the first to add lossless Bluetooth audio
Ifi Audio Zen Blue 3 DAC (front).

Ifi Audio's new Zen Blue 3 wireless digital-to-analog converter (DAC) will officially be available to buy for $299 on July 9. When it is, it will be the first device of its kind to support a wide variety of Bluetooth codecs, including Qualcomm's aptX Lossless, the only codec that claims to deliver bit-perfect CD quality audio over a Bluetooth connection.

Admittedly, there are very few devices on the market that can receive aptX Lossless (and fewer that can transmit it), so it's a good thing that the Zen Blue 3 also works with the more widely supported aptX Adaptive, LDAC, and LDHC/HWA codecs (all of which are hi-res audio-capable), plus the three most common codecs: AAC, SBC, and aptX.

Read more
The new Beats Pill might replace Sonos on my back porch
The 2024 Beats Pill and an aging Sonos Play:1.

If I were to build an outdoor stereo in 2024, I'd do it with a pair of portable Beats Pills instead of Sonos speakers. Phil Nickinson / Digital Trends

In 2017, after more than a decade in our home, my wife and I added a pool. With it came a covered deck, making what basically was a new outdoor room. Not uncommon at all in Florida, but new to us.

Read more