Skip to main content

What’s inside a fitness tracker, anyway?

Just a couple years ago, fitness bracelets were basically glorified step counters worn on your wrist. Now, they’re doing everything from measuring your heart rate on a run to warning you to get out of the sun. And they’re everywhere. Every company from Fitbit to Jawbone and Microsoft makes a pretty advanced piece of wrist-worn technology now — all with the promise of better health.

But what’s in these things, anyway?

Even though fitness bands are fairly simple compared to full-blown smartwatches, a growing number of sensors crammed inside has turned them into complex labs on your wrist. For example, Microsoft’s Band advertises 10 different sensors in the tiny package. With expectations higher than ever, bands are getting very technical and complicated to compete.

These are the sensors inside, making it happen.

Accelerometers

The most common and basic tracker included is the accelerometer. It can be used for multiple things, but is typically put to work counting steps. By measuring orientation and acceleration force, they can determine whether the device is horizontal or vertical, and whether it’s moving or not.

Not all accelerometers are created equal. You’ll find both digital and analog ones, different sensitivities, and different numbers of axis. The very basic ones will only have two axis, while three-axis sensors can measure their position in three dimensions. At this point, most fitness trackers use fairly advanced accelerometers for increased accuracy.

GPS

GPS is decades-old technology, but its appearance in fitness bands is relatively new because the chips are becoming more efficient — nobody wants a huge band on their wrist to accommodate a giant battery.

GPS is still fairly power hungry compared to other sensors.

The global positioning system a comprises a network of 29 total satellites orbiting the Earth — at any location, a person should be in range of four satellites needed to pinpoint an exact location.

The GPS receiver receives a high-frequency, low-power radio signal from the satellites. The time it takes for a signal to reach your wrist can be translated into your distance from the satellite, which can be translated into precise coordinates with data from enough satellites. GPS chips continue to get better at handling battery usage, but GPS is still fairly power hungry compared to other sensors.

Unlike simple step counting, GPS allows runners, walkers and cyclists to easily map their exercise and analyze the terrain where they were excising.

Optical heart-rate monitors

Unlike the EKG a doctor might use to measure your heart rate, an optical heart-rate monitor measures your heart rate using light. An LED shines through the skin, and an optical sensor examines the light that bounces back. Since blood absorbs more light, fluctuations in light level can be translated into heart rate – a process called photoplethysmography.

Currently, using an optical heart rate monitor on the wrist just isn’t as accurate as using one on the fingertip or on the chest. The chest-worn models more closely mimic an EKG machine.

Basis B1
Basis B1 teardown (Image: iFixit) Image used with permission by copyright holder

There are also a lot of nuances to photoplethysmography, so there will be more variation from brand to brand. For instance, each band has to compensate for skin tone. Despite some lofty by manufacturers, the accuracy of results can vary significantly. These aren’t for professional athletes, they’re more used for overall heart-rate guidance – especially the wrist-worn types.

Galvanic skin response sensor

Galvanic skin response sensors measure electrical connectivity of the skin. When internal or external forces cause arousal — of any kind — the skin becomes a better conductor of electricity. Essentially, when you start to sweat, either from exercise or something else, the band will be able to monitor that.

An LED shines through the skin, and an optical sensor examines the light that bounces back.

Detecting when someone is sweating gives the software more information about what a user is doing, which allows for better health tracking. Being able to correlate the level of activity with a different source than just gravity from the accelerometer, allows these programs to take on a more trainer-like role — recommending specific exercises and levels of exertion.

Thermometers

Even a basic thermometer can provide valuable information by way of your skin temperature. Rising skin temperature can indicate to a fitness band that you’re exerting yourself, or if your heart rate isn’t rising accordingly, that you might be getting sick.

Ambient light sensors

Ambient light sensors are all around us. For instance, one tells your phone to dim its screen at night and brighten it in the sun. A fitness tracker uses it for the same purpose, and for detecting the time of day.

Samsung Gear Fit
Samsung Gear Fit teardown (Image: iFixit) Image used with permission by copyright holder

The way an ambient light sensor works, the light spectrum is narrowed so that only forms of light visible to the human eye are detected. That light is translated into a digital signal and fed to the processor inside the band.

UV sensors

But what about other forms of light? Instead of telling your fitness band how bright it is around you, UV sensors tell it when you may be absorbing harmful UV radiation – usually from the sun. Software compares this data to the values recognized by scientists to be harmful, and warms you to get out of the sun if you’re likely to burn.

Bioimpedance sensors

Jawbone’s new UP3 wrist band uses a single bioimpedence sensor to cover three bases: heart rate, respiration rate, and galvanic skin response. According to the company’s own  blog post explaining the technology, “The sensor measures very tiny impedance changes within your body. For heart rate, we are measuring the impedance changes created by the volume of blood that is flowing in the Ulnar and Radial arteries.”

The same sensor, worn around the wrist, will also be able to tell respiration and hydration by looking at metrics like oxygen in the blood. It does this by using four electrodes that drive a tiny bit of electrical energy to each other, and then measuring the results.

Conclusion

These sensors may provide a fitness band with reams of data about your heart-rate, body temperature and even elevation, but it’s not worth much without software to translate it into useful advice. From anticipating illness to spurring you on to more exercise tomorrow, it’s all of these sensors working together that truly provide a clear picture of your health today, and what you can do to improve it tomorrow.

Tyler Hayes
Tyler Hayes is a Southern California native. Besides being an early adopter in the tech space, constantly wanting to try all…
Fitbit recalls Ionic smartwatch after several burn reports
best walmart deals on apple watch garmin and fitbit ionic smartwatch adidas edition ice gray silver

Fitbit Ionic smartwatch users need to stop using their devices right now. The company has recalled its Ionic wearable after over 150 reports of the watch’s lithium-ion battery overheating, and 78 reports of burn injuries to the users. It will offer a refund of $299 to the Fitbit Ionic smartwatch users who return the device.

Fitbit has received at least 115 reports in the United States and over 50 reports internationally about the Ionic smartwatch's battery overheating. It is recalling the device as there are two reports of third-degree burns and four reports of second-degree burns out of the 78 total burn injuries report.

Read more
Razer Anzu smart glasses deal knocks $140 off the price tag
The Razer Anzu smart glasses placed on top of an open book.

While smartwatch deals have slowly claimed their place in the mainstream, smart glasses haven't turned out to be as popular. Gaming-focused brand Razer, however, is trying to renew interest in smart glasses with the Razer Anzu, which you can currently purchase from Best Buy at $140 off. If you'd like to give them a try, they're available for just $60, less than half their original price of $200.

There have been failures like the Google Glass and Snap Spectacles, and hopeful attempts like Oppo's Air Glass and Apple's secretive project, but the Razer Anzu smart glasses take a different spin on the wearable device by designing them for indoors. While they come with polarized sunglass lenses, their clear lenses are more useful with their blue light filter, which protects your eyes from screen glare to prevent discomfort even after hours of playing video games or working from home. The smart glasses, which also have a built-in omnidirectional microphone and speakers, may also be more comfortable to wear for an extended period of time compared to headsets and headphones. You'll enjoy smooth, stutter-free sound with the Razer Anzu's low latency audio with a 60ms Bluetooth connection.

Read more
The best Samsung Galaxy Watch 4 screen protectors
Person holding skateboard while wearing the Samsung Galaxy Watch 4.

A new, sleek design and digital bezel help the Galaxy Watch 4 stand out in the crowd and set it apart from the traditional style of the Galaxy Watch 4 Classic. Whether you've picked up a 40mm model with a 1.2-inch Super AMOLED screen or opted for more screen real estate with the 44mm model, that stand-out design needs protecting from scratches and knocks. That means it's time for our picks of the best Samsung Galaxy Watch 4 screen protectors, with something to suit all budgets.

These screen protectors will all fit the 40mm or 44mm models of the Galaxy Watch 4. If you've got a Samsung Galaxy Watch 4 Classic, these won't fit.
Spigen Glas.tR EZ Fit Screen Protector

Read more